Pickleball is a popular sport that can be played indoors or outdoors. If you have the space, you can build a pickleball court in your backyard. Building a pickleball court is a big project, but it’s not as difficult as you might think.
This article will give you a step-by-step guide on how to build a pickleball court in your backyard. This will also give you some tips on how to maintain your court and keep it looking like new.
Choose The Right Location For Your Court
The first thing you’ll need to do is choose the right location for your court. You’ll want to pick an area that gets plenty of suns and is sheltered from the wind. Ideally, you’ll want to build your court in a space that already has a level surface.
Measure The Area For Your Court
Assuming you’ve found a good location for your court, the next step is to measure the area for your court and see how much space you have. You’ll want to leave at least 3 feet of space behind the net and 6 feet on both sides.
You’ll also want to leave about 2 feet of space between the pickleball court and any obstacles like trees or fences. Next, you’ll need to measure the length of the court. The standard pickleball court is 20 feet long and 10 feet wide.
Choose The Type Of Surface For Your Court
Next, you’ll need to decide what type of surface you want for your court. There are three popular options: wood, concrete, and asphalt.
Wood: If you choose wood, you’ll need to make sure you use pickleball-approved wood. You can use several different types of wood, but cedar and redwood are popular options. Cedar is preferred because it’s rot-resistant.
Concrete: Concrete is another popular option. This is the most expensive option, but it’s also the most durable. Concrete is also easy to maintain and repair. You can use an asphalt base to make it easier to maintain.
Asphalt: This is the cheapest option, but it’s also the easiest to damage. You’ll need to seal the asphalt if you want to prevent it from getting too soft in the sun.
Install The Netting For Your Court
Once you’re done building your court, the next step is to install the netting. You’ll want to tack the netting at least 1 foot above the ground on both sides and behind the backboard. You also need to make sure that you’re stretching the netting tightly.
If you’re building your court on asphalt, you may want to use a net that’s made of synthetic fibers. These nets are easier to install and they’re easier to repair.
Add The Lines For Your Court
The next step is to add the lines for your court. You’ll want to put a line inside the service line, the center line, and the sidelines. You can use tape or paint to mark the lines. You may want to paint the lines on concrete courts, but you can use tape to mark the lines on asphalt courts.
Maintain Your Court
Finally, you’ll want to make sure you’re maintaining your court. You’ll want to water your court regularly during the summer months to keep it from drying out. You can also add a layer of mulch to help keep the soil moist.
You’ll also want to add a layer of gravel on top of the soil to help prevent weeds from growing. You’ll also want to add a layer of sand on top of the gravel to protect the surface of your court.